The gas-liquid booster pump continuously discharges gas through the high-pressure piston controlled by the one-way valve. The outlet pressure of the gas-liquid booster pump is related to the air driving pressure. The working medium of pneumatic liquid booster pump can be water, with high reliability, maintenance free and long service life. The pneumatic liquid booster pump is a plunger pump. When working, the booster pump works quickly and again. When the output pressure is close to the set pressure, the reciprocating speed of the pump slows down until it stops. At this time, the pump output pressure is constant, the energy consumption is low, and the parts stop moving.
According to the practical needs of customers, the pneumatic hydraulic booster pump, oil tank (water tank) and components are assembled in the tubular frame or sealed box. The structure is compact and easy to use. Pressure regulators, pressure gauges, valves, etc. are panel devices. The output pressure can be regulated by setting the driving air pressure regulator. When the set pressure is reached, the pump will stop automatically and resume when the pressure drops.
The technical parameters and composition of the pneumatic liquid pressurization system equipment. The liquid working pressure can be adjusted freely at 0-640mpa, and the medium is usually water or oil. The pneumatic liquid pressurization system uses a single air control unbalanced gas equalizing gas distribution valve to complete the automatic reciprocating motion of the pump. All parts of the pump body are made of aluminum alloy. The aluminum alloy parts are processed and oxidized to black to ensure beautiful appearance and never rust. The whole set of seals of the pump are imported high-quality products to ensure the performance of the pump.
The equipment group shall be composed of oil tank, pneumatic liquid booster pump and pipeline station, including air pressure gauge, high pressure gauge, pressure regulating valve, low pressure switch and high pressure switch. The size of the reserved interface and the size of the driving gas inlet are usually set as 12mm diameter straight plug-in head.
Brief operation of equipment operation: manual control: connect the equipment and air compressor → regulate the pressure regulating valve → turn on the high-pressure switch → turn on the low-pressure switch, start the experiment → pressurize to the required pressure and close. Start holding on to pressure → hold on to pressure completion, turn off each switch and the laboratory completes. Spray the surface of the box. The connection of each hydraulic component is reliable and no oil leakage is allowed. The connecting pipe is made of stainless steel.
The above wonderful contents are supported by the gas-liquid booster pump manufacturer. There are many wonderful contents waiting for you to check. Welcome to continue to follow our website: and look forward to your attention!