8 features of a pneumatic hydraulic booster cylinder:
The structure is simple and compact, the output is easy to adjust, and the maintenance is convenient
It can reach the high output of oil pressure, which can be achieved by non pure air pressure system
The action speed is faster than hydraulic transmission and more stable than pneumatic transmission
The price of the equipment is cheaper than that of the oil pressure system
There are a variety of installation methods for you to choose from
Maintenance is easier than oil pressure system
Compared with hydraulic system, energy saving is more than 30%
The trouble of temperature rise in no oil pressure system
Product selection of two gas-liquid booster cylinder:
On site air source pressure
Output tonnage requirement
Total travel requirements
The requirements of pressurization stroke can be determined according to the shape of workpiece before and after forming
Return pull requirements, etc
Output calculation of three gas-liquid booster cylinder:
: section area of pneumatic cylinder a = 3.14 * D; D: inner diameter of cylinder; F: theoretical force; P: operating pressure
Application scope of four gas hydraulic booster cylinder:
Application scope of gas-liquid booster cylinder "ALT = application scope of gas-liquid booster cylinder"
Which situations are not suitable for booster cylinder?
There is no need to consider the working environment, oil pollution, heavy water and steam corrosion on site
The occasion of long output stroke and continuous back and forth action
Heavy stroke load or large machine area
Where is the supercharged cylinder suitable?
Hope to bring quiet, green, pollution-free and high-efficiency production workshop, such as dust-free workshop, air-conditioning plant, etc
Use compressed air as power, but it is difficult to meet the working requirements of general pneumatic cylinder
In the case of small space demand and large output
In the case of long standby time, long working stroke, short high output stroke and long pressurization time, and low energy consumption is required
Five gas-liquid booster cylinder use related precautions:
Before connecting the air pipe, please clean the dust and impurities in the cylinder.
Please do not place the product near the chemicals, which is easy to corrode the booster cylinder.
Pay attention to the working environment of the product, such as the temperature exceeds the range (- 5 ℃ ~ 60 ℃) of the booster cylinder.
The operating speed of the booster cylinder is 30-100min / time. Do not operate at high speed or overload state. This will greatly shorten the comprehensive service life of the product.
Jiurong manufacturer recommends that the gas source pressure of booster cylinder should be 4-7kg / C M2 (the standard of our company's calculated output is 6kg / C m2).
Please follow the normal procedure of the booster cylinder, i.e. preloading action pressurization release preloading reset. Check the operation of the booster cylinder frequently.
If the booster cylinder has been used for more than one year or the hydraulic oil has deteriorated, it is recommended to replace the hydraulic oil in the product, so as to continue to use the product normally and improve its service life.
Please install a pressure reducing valve at the inlet of the pressurization section, so as to effectively protect your product and avoid damaging your mold or workpiece due to excessive pressure during pressurization.
Today, I'd like to introduce to you the relevant knowledge of gas-liquid booster pump. For more wonderful contents, please click our website: We will have more knowledge for you.