We know that the booster pump is actually what we often call centrifugal pumps. When the centrifugal pump works, it needs to be pre pumped into the pump chamber to continue to absorb water and produce pressure. But most of the customers don't know how to add water to the pump cavity:
1, if it is higher than the pump water or tap water, without artificial irrigation, only need to open the exhaust valve in the pump before operation, water can be filled in the pump cavity, until the exhaust valve is out of date and complete irrigation exhaust.
2, if the water pump is below the suction level of the water pump, the pool water must be artificially irrigated, and the tap water is very convenient. If there is no running water, it can only be slowly irrigated through other tools.
The general water pump has a special water mouth: general light vertical multistage centrifugal pump in the pump irrigation position of the exhaust valve; vertical single-stage pipeline pump in and out of the water at the top of the flange hole irrigation; horizontal centrifugal pump can pump irrigation exhaust valve position. The basic pump into irrigation exhaust problems, have a special irrigation and exhaust. But sometimes, depending on the exhaust valve or irrigation port irrigation, resulting in incomplete irrigation, you can consider on the inlet pipe to do a three pipe irrigation pipe, while running, while irrigation is sufficient.
If you still have any places you don't understand, you are welcome to come to our company for consultation or call for advice. Your demand is our goal and your satisfaction is our pursuit.