The operator of the hydraulic (pressure) test system must receive the corresponding training, familiar with the working principle of the equipment, the operation procedure, the daily maintenance, etc.
The water in the air filter should be discharged at any time.
The gas medium used in the hydraulic (pressure) test system must be kept clean, and the filter net in the pipe filter should be cleaned regularly.
The liquid of the hydraulic (pressure) test system must be filtered to ensure that the medium in the liquid box is added to the medium without iron debris, and the filter screen in the filter must be cleaned regularly.
Because the hydraulic (pneumatic) vibration during transport test system may lead to loose connection the pipe or valve etc., so for the first time in each of the transport equipment, to closely observe whether each joint loosening caused by leaking and take appropriate measures to deal with.
Keep the equipment clean and sanitary.
To prevent high temperature, humidity, dust, corrosive medium, water and other immersion equipment.
Check regularly to keep the integrity of parts and parts.
Place the fixture joint in a dry and clean place.
Ensure that the driving air is a clean and dry gas to prevent damage to the sealing parts of the booster pump and the one-way valve and other accessories.
Please fill in the warranty card and send it back to our company so that we can give you better service.
The above is a detailed introduction to the gas booster pump for you. I hope to help you. If you have any questions, please feel free to contact us. We will provide you with the most professional attitude.