How to order pneumatic hydraulic booster pump为了使您订购的液压泵处于工作状态，您必须了解以下参数:
In order for the hydraulic pump you ordered to be in the best working condition, you must know the following parameters:
1. Pressure and flow of driving gas
All pumps and power units use up to 0.69mpa driving pressure in continuous operation and up to 1.03mpa driving pressure in intermittent operation. Refer to the required drive gas flow meter in order to consume the best performance pneumatic pump.
2. Working pressure and flow
The working pressure of each pump and power unit refers to the pump output pressure and flow when the driving pressure is 0.48mpa. If the maximum output pressure of the pump is greater than the required working pressure, safety measures shall be considered. The maximum output pressure refers to "table of approximate ratio of static driving air pressure to output hydraulic pressure" in the product catalog. The selection of power unit is consistent with that of pump. Refer to the performance curve in the product catalog for work flow.
3. Liquid medium transportation
The liquid medium delivered by the pump is an important factor to consider when selecting the pump. The material of the hydraulic part and the hydraulic seal ring is determined by the liquid medium. Pumps can be oil, water and most liquid media. The main hydraulic seal of standard pump is butadiene rubber and polyurethane, and one-way valve seat is teflon seal. Other sealing materials are fluorocarbon and ethylene propylene, which are mainly used for special transportation medium. Consult factory or local dealer to select sealing material.
4. Acceptable volume and weight
For some applications, the size and weight of pumps and power units should also be considered.
以上是气液增压泵厂家为大家先容的相关内容，想要了解更多内容，欢迎访问网站：The above is the relevant content introduced by the gas-liquid booster pump manufacturer. For more information, please visit the website: