The main function of the compressed gas booster pump is to boost the pressure of the compressed gas for the second time. It is mostly used in the factory where the local air pressure is insufficient. There is no need to reform the gas pipeline or add a high-pressure air compressor. The utility model has the advantages of economy, safety, explosion-proof and low noise. The following small series of compressed gas booster pump in what circumstances to do with the gas tank, how to do with a simple introduction.
Factory compressed gas pressure is insufficient, generally will be equipped with compressed gas booster pump, simple and practical. But how to configure the gas storage tank of the compressed gas booster pump? This depends on the use of compressed gas on site, which is generally divided into instantaneous gas consumption, persistent gas consumption, one stream by one gas consumption, etc.
Instantaneous gas consumption: This is usually used in valve switch, gas gun and other fields. It is characterized by long pressurization storage time and large instantaneous consumption. At this time, the compressed gas in the tank equipped with the compressed gas booster pump is generally not too small to reach the instantaneous consumption required by the equipment. The size of the gas storage tank can be selected according to the instantaneous consumption of the equipment.
Persistent gas consumption: this situation is more common in gas purging. In this case, the equipment requires constant and stable air pressure output for the gas source. The selection is mostly based on the flow of gas booster pump. The larger the flow of gas booster pump is, the larger the gas storage tank is, and the smaller the flow is, the smaller the corresponding gas storage tank is.
One by one of the gas consumption: this common with the cylinder, pneumatic valve, etc. In this case, the compressed gas used by the equipment is mostly below consumption and below stop. In this case, it depends on the consumption of compressed gas by the equipment. If the equipment is small, it can be equipped with small gas storage tanks.
In short, the customer's on-site situation is ever-changing. If you really don't have a good grasp of it, you can consult feinte's sales engineer and ask the sales engineer to help recommend it.